The Canard Six | Carbon-Weave Front Bumper Lip Fins for BMW F80 M3 and F82 M4

Save 20%
East Supplier PlatformSKU: 3256801394242295-Carbon Fiber

Price:
$15.38 $19.23

Tax included Shipping calculated at checkout

Stock:
In stock (945 units), ready to be shipped

Description

Aerodynamic parts on a road car are usually decoration pretending to be engineering. That is fine, as long as everyone involved is honest about which one it is. The Canard Six is a set of six ABS fins with a carbon-weave finish, made for the F80 M3 and F82 M4 front bumper, and it does exactly what it appears to do: it changes how the front of the car reads at a standstill and in a photograph, and it adds a visual edge to a bumper that BMW left deliberately plain.

The material choice is the interesting part. ABS takes a shape under heat and holds it, which is why it is the right polymer for a part that lives on the front of a car and meets kerbs, speed bumps, and gravel. A true carbon part in the same position would be lighter and far more expensive, and would still fail the same way against a kerb, only with a louder noise. The weave finish on ABS gives the visual signature without putting a fragile laminate where the car is most exposed.

The six pieces mount as three per side along the lower bumper line, weighing about 300g for the set, so nothing about the car's balance or ride changes. This is a styling part, and it is built to be installed once, correctly, with the bumper line respected rather than forced.

A front end is a signature. This is one way to sign it.


What The Set Actually Changes

  • ✦ Six-piece canard set, three fins per side of the front bumper
  • ✦ Shaped specifically for the BMW F80 M3 and F82 M4 front bumper
  • ✦ ABS construction that holds shape and survives kerb and gravel contact
  • ✦ Carbon-weave finish for the visual signature without a fragile laminate
  • ✦ Approximately 300g for the complete set
  • ✦ Follows the existing bumper line rather than sitting proud of it
  • ✦ Adds definition to a front end that leaves the factory plain
  • ✦ Supplied as a matched set for one vehicle

Technical Specifications

  • Pieces: 6 canard fins, three per side
  • Material: ABS with carbon-weave finish
  • Vehicle fitment: BMW F80 M3, BMW F82 M4
  • Item type: Front bumper lip fin / splitter canard
  • Set weight: Approximately 300g
  • Mounting location: Lower front bumper, along the side line
  • Function: Styling and front-end definition
  • Finish care: Wipe clean, avoid abrasive polish
  • Certification: CCC
  • Supplied as: Matched six-piece set

Where It Belongs

Owners of an F80 or F82 typically reach this part after wheels and suspension, at the point where the car is mechanically finished and the front end still looks factory. Track day drivers fit it as visual identification rather than as a claimed downforce device. Detailers and independent BMW specialists keep a set in stock because it is a low-cost, high-visibility upgrade that sells itself on a showroom floor.

Owner Questions

Will this fit my F80 M3 or F82 M4?

Yes. The set is shaped for the F80 M3 and F82 M4 front bumper. Send us your model year if you want confirmation before ordering.

Is this real carbon fibre?

It is an ABS part with a carbon-weave finish. That is a deliberate choice for a component mounted where kerbs and road debris arrive first.

Does it require drilling?

A canard set mounts along the lower bumper line and typically requires fasteners into the bumper. If you need the exact mounting method before ordering, ask us and we will confirm what ships with the set.

Will it affect ground clearance?

The fins sit along the side of the lower bumper rather than below it, so ride height and approach angle are effectively unchanged.

How do I care for the weave finish?

Wash with normal car shampoo and avoid abrasive compounds. A finishing polish on a soft pad keeps the weave defined.

Can it be removed later?

Yes, with the mounting points filled and the bumper refinished. It is an accessory, not a permanent modification to the bodywork.

The EastSupplier Promise

We buy the way a workshop buys: one supplier, one standard, no surprises at the port. Every listing is inspected before it is packed, documented in English, and shipped with a real person on the other end of the message. If a piece arrives wrong, damaged, or simply not as described, we replace it or refund it. You are not buying a lottery ticket with a tracking number.

Questions on bulk quantities, mixed pallets, or recurring supply? Write to us and a human answers within one business day.

Customer Reviews

Customer Reviews

Based on 5 reviews
60%
(3)
40%
(2)
0%
(0)
0%
(0)
0%
(0)
N
Nadia F.
Good finish, budget for prep

Clear coat is even and the edges are rolled rather than raw, which is better than the set I returned last year. You do need to clean the bumper properly and mock it up first, because the tape grabs instantly once it touches paint.

C
Callum D.
Weave lines up with the bumper

Fitted to an F80 with the M Performance lip already on and the twill direction matches the OEM carbon. Test fitted twice before peeling tape, then used an adhesion promoter and it has stayed put through a motorway run and two washes.

M
Marcus D.
Three per side, balanced look

The symmetry is what makes it work. Installed along the lower bumper and the car photographs dramatically better from the front three quarter angle.

C
Chloe B.
Weave finish looks right at a glance

Not real carbon and it does not pretend to be, but at this price the finish reads correctly next to the mirrors. Weight is negligible, roughly 300g for the set.

A
Andrei P.
Front end finally looks finished

Fitted on an F80 and the six pieces follow the bumper line instead of sitting proud of it. ABS was the right call for a part that meets speed bumps and gravel.

Payment and Security

PayPal

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently Seen