Description
The headlight is the first sentence your car says to the night. Dim halogen beams say stay home. The Lumen Core says the road ahead is handled.
This 60W LED headlight kit pushes 12000 lumens per pair through a compact heat-dissipating body, replacing the tired glow of factory bulbs with a clean, white beam that lights the shoulders of the road instead of just the painted line. The plug-and-play design covers the most common automotive fittings, from H11 and 9006 to HB4, H7, H8, H9, H1, and HB3, so one kit covers most of the cars in a household.
The secret is the thermal architecture: an integrated driver and aluminum heatsink keep the LEDs at working temperature even in summer traffic, protecting both the bulb and the lamp housing. Fog lights, high beams, low beams: the same crisp output, without the yellow fade that halogen owners accept as normal.
Night driving is not about seeing further. It is about being seen sooner.
Installation is genuinely a ten-minute job on most cars: twist out the old bulb, seat the new LED in the same bayonet position, and plug the connector into the factory socket. The compact driver sits inside the housing cap, so there is no dangling box to zip-tie into the engine bay, and no adapter harness to lose.
Key Features
- ✦ 60W per kit with up to 12000LM combined output, dramatically brighter than halogen
- ✦ Multi-fit base covers H11, 9006, HB4, 9005, HB3, H7, H8, H9, H1 applications
- ✦ Integrated driver and aluminum heatsink for sustained thermal performance
- ✦ Clean white light with a wide beam pattern for better shoulder visibility
- ✦ Plug-and-play install with no modifications to factory housings
- ✦ Fog light and high beam compatible in most applications
- ✦ Rust-resistant housing built for under-hood temperature swings
Technical Specifications
- Power: 60W per kit (30W per bulb)
- Output: Up to 12000LM per pair
- Color Temperature: Cool white (approximately 6000K)
- Base Types: H11, 9006, HB4, 9005, HB3, H7, H8, H9, H1
- Cooling: Integrated driver + aluminum heatsink
- Voltage: DC 12V vehicle system
- Application: Low beam, high beam, fog lights (verify fitment)
- Construction: Sealed aluminum housing, dust and moisture resistant
Application Scenarios
The Lumen Core fits the daily drivers that share a garage: sedans and SUVs with H11 or 9006 low beams, trucks running H7 or H9, and older cars whose fog lamps still use H1 or HB3. It is a popular upgrade for commuters who drive rural roads at night, delivery drivers logging hours after dark, and anyone who has replaced the same halogen bulb twice in a year and decided the yellow glow is a choice they no longer make.
Frequently Asked Questions
Q: Will these fit my car?
A: The kit covers H11, 9006, HB4, 9005, HB3, H7, H8, H9, and H1 bases. Check your owner manual or the base of your current bulb to confirm which type your housing uses, then select the matching adapter position in the kit.
Q: Are they plug-and-play?
A: Yes. The bulb connects directly to the factory socket with no wiring modifications. Some vehicles with advanced lighting modules may need a CANbus adapter, which is common for LED retrofits on newer European cars.
Q: Will they cause error codes?
A: Most vehicles accept them without issue. On cars with bulb-out monitoring, a CANbus-friendly adapter resolves the message. Confirm your vehicle generation before ordering if you know it has sensitive electronics.
Q: Are they bright enough for fog and high beam use?
A: At 12000LM combined they are dramatically brighter than halogen in all three roles. Use them for fog lights and high beams where the base type matches and your housing is designed for the output.
Q: Do they run hot?
A: The aluminum heatsink and integrated driver keep operating temperature controlled. The design protects both the LEDs and the lamp housing during extended night use and summer traffic.
Q: How long do they last?
A: LEDs outlast halogen bulbs by a wide margin under normal use. The sealed construction protects the electronics from the moisture and vibration that kill cheaper retrofits.
The EastSupplier Promise
Every product in our catalog is sourced directly from vetted manufacturing partners, inspected before dispatch, and shipped with tracking. If anything arrives damaged or does not match its listing, our support team responds within 24 hours with a replacement or a full refund. No forms, no waiting, no fine print.
Q: Do they come in a set of two?
A: Yes, the kit ships as a pair, which covers both sides of the vehicle for a matched beam pattern and color temperature. Order one kit per vehicle.
Q: What if my car needs a decoder?
A: Vehicles with bulb-out warning systems may need a CANbus decoder. If your dashboard flags a fault after install, check your vehicle generation and add the matching decoder before contacting support.
Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.