The Watchful Ledger | ANNKE 4K 32-Channel PoE NVR Recorder with 16 PoE Ports

Save 20%
East Supplier PlatformSKU: 1005005972446146-32CH-UNITED KINGDOM

Price:
$1,317.72 $1,647.15

Tax included Shipping calculated at checkout

Stock:
In stock (200 units), ready to be shipped

Description

A camera is only as trustworthy as the recorder holding its footage. Thirty-two cameras watching a perimeter produce more data in a week than most recorders can accept, and the failure mode is quiet. Frames arrive late, resolution is quietly reduced, and the incident you actually needed lands in the gap. The Watchful Ledger is the component built so that this does not happen.

The specification is written for load rather than for brochures. Thirty-two IP camera inputs are accepted at 256 Mbps of total inbound bandwidth, recording resolution reaches 12 megapixels, and H.265+ compression does the arithmetic that keeps the archive affordable on disk. Local display runs from a 4K HDMI output at 3840 by 2160, with independent VGA output for a second station, so the security desk and the monitoring position do not have to take turns.

Storage is deliberately left open. Four SATA interfaces accept drives so the retention window can be sized to the site rather than to a bundled disk, and configurations with 1 TB or 2 TB drives fitted are available at checkout. Power over Ethernet carries both power and video over one cable for runs of 100 to 300 metres, which removes the need for a power outlet at each camera position. The 32-channel configuration includes a 16-port PoE switch, so the full channel count is reachable on arrival.

Three weeks after an incident, the only perimeter that counts is the one the recorder can still show.


Key Features

  • ✦ 32 IP camera inputs with 256 Mbps total inbound bandwidth
  • ✦ Recording resolution up to 12 MP
  • ✦ H.265+, H.265, H.264+, H.264, and MPEG4 compression
  • ✦ 4K HDMI output at 3840 x 2160
  • ✦ Independent HDMI and VGA outputs for two display positions
  • ✦ 4 x SATA interfaces for user-selected storage
  • ✦ 16 PoE ports with 100 to 300 metre transmission distance
  • ✦ 32-channel configuration supplied with a 16-port PoE switch
  • ✦ RJ45 network connection

Technical Specifications

  • Model: N931BB
  • Camera inputs: 32 IP channels
  • Inbound bandwidth: 256 Mbps total
  • Recording resolution: Up to 12 MP
  • Compression formats: H.265+, H.265, H.264+, H.264, MPEG4
  • HDMI output: 4K, 3840 x 2160
  • VGA output: Independent from HDMI
  • Storage: 4 x SATA HDD interfaces
  • PoE ports: 16, transmission distance 100 to 300 m
  • Network: RJ45
  • Channel configurations: 32CH includes a 16-port PoE switch; 16CH reaches 32 channels with an external switch
  • Drive options: 1 TB, 2 TB, or bring your own drives, selected at checkout

Where It Belongs

This recorder suits sites where camera count grows before anyone changes the network. Warehouses and loading yards with long perimeters, retail floors with multiple aisles, parking areas, farms, and multi-building commercial sites all reach thirty-two channels faster than expected. The 256 Mbps inbound ceiling means the recorder keeps accepting every stream instead of dropping frames under load, and the 4K HDMI output gives a control room a readable wall feed. Because storage sits in four SATA bays, the retention window can be set by policy. Add drives for ninety days, keep two for thirty.

Frequently Asked Questions

Q: How many cameras can this recorder accept?

Thirty-two IP camera inputs are supported, with a total inbound bandwidth of 256 Mbps.

Q: What is the difference between the 16CH and 32CH configurations?

The 32CH option includes a 16-port PoE switch, so the recorder reaches thirty-two channels on arrival. The 16CH option can also reach thirty-two channels if you supply your own PoE switch.

Q: Does it come with hard drives?

Drive configurations with 1 TB or 2 TB fitted are available, and you can also order the recorder without drives and install your own in the four SATA bays.

Q: How far can a PoE camera run from the recorder?

Power over Ethernet transmission is rated from 100 to 300 metres depending on cable and conditions.

Q: Can I run both a local monitor and a remote view?

Yes. HDMI and VGA outputs operate independently, and the network connection supports remote access.

Q: Which compression format should I use?

H.265+ is the most efficient option and is normally the right choice. The recorder also supports H.265, H.264+, H.264, and MPEG4 for mixed-camera installs.

The EastSupplier Promise: Every unit is sourced through our own supply chain, inspected before dispatch, and shipped with tracked international delivery. If a component arrives damaged or the specification does not match this listing, our team replaces it or refunds it. No forwarding, no third party, no runaround.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
O
Owen M.
Right recorder, budget for drives

Great bandwidth headroom and the compression options help the archive. Budget for drives separately if you need long retention. The recorder itself has been stable for two months of continuous recording.

B
Bianca F.
Four drive bays saved the project

Retention was the actual requirement and four SATA bays let me size it properly instead of guessing. Installation was straightforward and the secondary video output runs the desk monitor independently.

G
Gareth V.
Keeps up with twenty-eight cameras

Ordered the thirty-two channel version with the PoE switch included. It accepts every stream without dropping frames, which my previous recorder certainly did not. The 4K output is noticeably sharper on the wall display.

Payment and Security

PayPal

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently Seen