The White Alcove | 60cm Under-Sink Bathroom Cabinet in Painted E1 MDF

Save 20%
East Supplier PlatformSKU: 1005008278752803-White-GERMANY

Color: White
Price:
$124.56 $155.70

Tax included Shipping calculated at checkout

Stock:
In stock

Description

The space under a basin is the most wasted volume in a bathroom. The White Alcove is a 60 cm cabinet built specifically for that volume, with a cut-out in the top panel that lets the existing basin trap and pipework pass through the carcass rather than forcing the cabinet out into the room.

The material is E1 grade MDF with a painted, smooth white surface. E1 is the low-emission board grade, which matters in a small room with little ventilation, and the painted skin is what makes the cabinet practical in a wet environment: splashes wipe off instead of soaking in, and the panels do not swell at the cut edges the way raw chipboard does. Inside, a single shelf divides the carcass into two compartments and can be set at three different heights, so a stack of towels and a caddy of cleaning bottles can share the same footprint.

The measurements are the ones people get wrong, so they are stated plainly. The carcass is 60 cm wide, 30 cm deep and 60 cm high. The base cut-out measures 18 cm wide by 16 cm deep, and it is positioned for a standard wall-hung or pedestal basin trap rather than for a vanity unit with a built-in bowl. Two doors close onto built-in magnets, which hold them shut instead of letting them bounce back open, and the magnetic catch is the small detail that makes the cabinet feel safe around children who open and close everything.

It is not a vanity and it is not a shelf. It is the piece of bathroom furniture that turns dead pipe space into storage you can close the door on.


What Makes It Work Under a Basin

  • ✦ Purpose-made base cut-out of 18 by 16 cm, sized for a standard basin trap rather than cut on site.
  • ✦ E1 grade MDF carcass with a painted white surface, suitable for damp rooms and easy to wipe down.
  • ✦ Two doors with built-in magnetic catches, so they close flush and stay closed.
  • ✦ Adjustable internal shelf with three height positions, one shelf creating two compartments.
  • ✦ Sixty centimeter width that matches common European and UK basin widths without a fitted surround.
  • ✦ Thirty centimeter depth, shallow enough for a small bathroom where a full vanity would block the door swing.
  • ✦ Flat-packed with clear instructions, so it can be assembled in the room it will live in.

Technical Specifications

  • Dimensions  60 cm W x 30 cm D x 60 cm H
  • Base Cut-Out  18 cm wide x 16 cm deep
  • Material  E1 grade MDF board
  • Finish  Painted smooth white surface
  • Doors  Two, with built-in magnetic catch
  • Internal Layout  One adjustable shelf, three height positions, two compartments
  • Installation  Assembly required, freestanding under-basin unit
  • Environment  Suitable for damp bathroom conditions
  • Care  Damp cloth, avoid abrasive cleaners on the painted finish
  • Room Fit  Small to medium bathrooms, cloakrooms, en suites

Bathrooms Where This Cabinet Fits

Cloakrooms and en suites are the natural home, because the basin is usually wall-hung with visible pipework and the floor area is too small for a full vanity. Family bathrooms use it under a pedestal basin where the pedestal leaves two narrow gaps, and the adjustable shelf lets those gaps hold stacked towels on one side and cleaning supplies on the other. Rental flats are a frequent use case since it is freestanding and can be removed without touching the plumbing. It also works in utility rooms and small salons under a hand-wash basin, where the requirement is closed storage rather than a decorative unit.

Measurement Questions Before Ordering

Q. Will the cut-out fit my existing trap?

The opening is 18 cm wide by 16 cm deep. Measure your trap and pipe positions against that before ordering, because a bottle trap sitting further back than 16 cm will foul the rear panel rather than pass through the cut-out.

Q. Does it come assembled?

No. It arrives flat-packed with instructions and assembles with basic tools. Assembly in the room is easier than carrying a built carcass through a doorway, which is why it ships flat.

Q. Is the board actually waterproof?

It is E1 grade MDF with a painted surface, which resists splashes and wipes clean. It is not marine plywood, so standing water against a cut edge should be dried rather than left to sit.

Q. Can the shelf be removed entirely?

Yes. The shelf sits on adjustable supports and can be taken out, which is useful if the pipework occupies the upper half of the carcass and you need the full height for a single tall item.

Q. Will the doors stay closed without handles?

The built-in magnets hold the doors shut and stop them bouncing back. Handles are not required, and a push-to-open style is easier to keep clean in a bathroom than a bar handle.

Q. What height basin does it suit?

The carcass is 60 cm high, so it sits under a basin mounted at normal vanity height. If your basin is set lower, check the clearance to the trap before ordering.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
N
Nerys F.
Assembly takes an evening

Instructions are clear but the flat pack is genuinely flat. Two people make it much quicker, especially lining up the doors.

L
Leocadia L.
Doors shut with a proper click

The magnets hold them closed and they do not bounce back, which matters with a toddler who opens everything. No handles to keep clean either.

K
Konrad N.
Cut-out matched an awkward bottle trap

Eighteen by sixteen was enough for the trap on a wall hung basin, and the pipework disappears inside the carcass instead of pushing the cabinet into the room.

Payment and Security

PayPal

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently Seen