84W 48V 2A铅酸电池充电器,适用于57.6V铅酸电池充电器,适用于4*14.4V电池组,高品质静音充电

节省20%
East Supplier PlatformSKU:4001053939840-3-Pin XLR-UK

价格:
$40.99 $51.24

含税 运费在结账时计算

股票:
有现货(9999 件),可随时发货

描述

规格

品牌名称: TANGSPOWER

快充: 是

数据传输: 其他

智能充电: 是

产地: 中国大陆

显示屏: 否

类型: 电动

认证: CE

认证: FCC

认证: RoHS

用途: 标准电池

型号: 48V 2A

包装: 是

颜色: 黑色

功率: 84瓦

重量: 350克

安全保护: 过压保护/过流保护/过载保护/短路保护

输入: 100-240VAC,50/60Hz

输出: 48V 2A

说明: 适用于电动自行车电池充电器

选择: 是

半选择: 是

TANGSPOWER 48V 2A 电动自行车铅酸电池充电器,适用于57.6V铅酸电池电动自行车踏板车摩托车充电器

规格:

- 品牌名称: TANGSPOWER

- 此充电器为铅酸电池充电器,请勿用于锂电池!

- 应用:铅酸电池标准电压为48V-57.6V(充满)

- 100%全新高品质超强保护。

- 输入: 100-240VAC,50/60Hz

- 输出: 48V 2A

- 充电指示灯: 充电时红灯亮,充满时绿灯亮

- 安全保护: 过压保护/过流保护/过载保护/短路保护

- 颜色: 黑色

- 最大功率: 84W

- 连接器: DC 5.5*2.1 / 3针XLR / 3P GX16 / RCA / 3P GX12 / 3P插头 / 4针XLR / XT90 / XT60

(请选择您需要的连接器,如果您不知道尺寸或需要其他连接器,请联系Tangspower客服,谢谢。)

- 插头: 欧盟 / 美国 / 英国 / 澳大利亚 / 韩国

(请选择您所在国家的插头,我们将根据您的选择发货,如果您不知道您所在国家/地区的插头,请联系Tangspower客服,谢谢。)

- 购买须知:请确保您的电池型号与Tangspower充电器匹配,并确保Tangspower连接器的正负极与您的原装充电器相同。如果正负极不同,Tangspower充电器将始终显示绿灯,并导致无法充电。

(如果您不确定电池型号或连接器的正负极,请在购买前联系Tangspower客服)

- 售后服务:收到包裹后充电器不工作,请及时联系Tangspower客服,故障充电器我们将退款或重新发货,请勿立即给出负面评价,请联系Tangspower客服,谢谢!

如果您使用万用表测试充电器,请将万用表充满电后再测试。万用表未充满电时会有误差。如果测试结果不满意,请联系Tangspower客服,谢谢!


包装内含:

1个48V 2A充电器


Tangspower充电器的使用与维护:


1. 充电时,先将连接器连接到电池,再连接交流电;充满后,先断开交流电,再拔下电池插头。如果充电时先拔下电池插头,尤其是在充电电流较大(红灯亮)时,极易损坏充电器。


2. 当LED灯变为绿色时,请继续充电2-3小时。


3. 请勿将电池电量耗尽再充电。否则电池无法得到保护,甚至可能损坏。


4. 长期浅放电电池,大约每3个月进行一次深放电,即所谓的重新点亮,这有利于激活电池深处长期不动的物质。点亮意味着骑行控制器电池欠压保护动作。


5.请及时在干燥处使用充电器。


6.不使用充电器时,请勿长时间连接电源。


Customer Reviews

Customer Reviews

Based on 8 reviews
75%
(6)
25%
(2)
0%
(0)
0%
(0)
0%
(0)
D
Daniel K.
Proper end-of-cycle voltage and genuinely silent

Bought the 4-Pin XLR version for my 48V e-bike pack and it behaves exactly like a charger should rather than a power supply with a plug on it. I measured the cut-off at 58.8V on my own meter and the pack no longer warms up in the last hour of charging the way it did with the stock brick. Fan noise is basically nothing, I charge overnight in the apartment hallway and nobody has ever noticed. Got the UK socket version and it arrived quickly.

A
Aaron S.
Reliable charger for stationary battery banks

Using this for a 48V lead-acid backup system. Charges consistently at 57.6V as advertised. No noise, no overheating after hours of use. Would prefer a longer DC cable for flexibility in rack mounting but that's a minor thing.

T
Tom W.
Perfect replacement for my Juiced Bike charger

Lost my factory charger and this one matched the 48V 2A spec exactly. The silent operation is a welcome upgrade from the buzzing original. Connector fits my RCR battery port. Charge time is about 4 hours on a depleted 13Ah pack.

R
Rasheed M.
Silent and genuinely smart, charges my e-bike without fuss

This 48V 2A charger brings my 57.6V pack up with zero fan noise and cuts off correctly when full — no trickle over-charging. The 4x14.4V setting is handy for my backup battery stack too. CE/FCC paperwork is as advertised.

S
Sofia M.
Set it and forget it

I leave it connected overnight on my workshop battery bank. No heat, no noise, no drama. Exactly what a maintenance charger should be.

Payment and Security

PayPal

您的支付信息已安全处理。我们不存储信用卡详细信息,也无法访问您的信用卡信息。

估算运费

You may also like

Recently Seen