5片Mono 2屏幕保护膜,适用于Anycubic Photon Mono 2 6.6英寸4K树脂LCD 3D打印机屏幕保护膜

节省20%
East Supplier PlatformSKU:1005006190946201-Photon Mono 2

价格:
$25.32 $31.65

含税 运费在结账时计算

股票:
有现货(964 件),可随时发货

描述

规格

品牌名称: MORKEYA

商品类型: 加热块

型号: Photon Mono 2

产地: 中国大陆

选择: 是

半选择: 是

兼容型号:屏幕保护膜兼容Anycubic Photon Mono 2 LCD树脂3D打印机。


产品描述


5片树脂3D打印机屏幕保护膜,适用于Photon Mono 2。


软屏保护膜的安装


1. 撕下沾污的屏幕保护膜,用工具包清洁固化屏。


A. 用酒精棉片擦拭屏幕


B. 用干擦布擦拭屏幕


C. 使用除尘器清除细小灰尘。


2. 撕下屏幕保护膜的背衬。将保护膜与屏幕边缘对齐,并用塑料刮刀从一端到另一端粘贴。仔细安装,确保没有气泡。


3. 用塑料刮刀轻轻将每个气泡推到屏幕边缘,以去除剩余的气泡。抚平保护膜,撕下前面板以完成。


套餐包括:5片屏幕保护膜 + 5个工具包 + 1个刮刀。

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
S
Sam B.
Exact fit for the Mono 2

Cut precisely for the 6.6 inch panel with no trimming and no lifting at the edge. Do not confuse this with the vat film, it is a different part and you still need to change the FEP on schedule.

C
Chloe A.
Do not skip the dust absorber

First attempt had a speck under the film, second was clean because I used the dust absorber properly. Five in the pack is why that was only an inconvenience. No visible effect on print detail.

I
Ivan D.
Cheap insurance for an expensive LCD

Fitted before the first print and it has already taken a cured speck from a failed print that would have gone into the glass. Installation kit is complete and there were no bubbles following the wet method.

Payment and Security

PayPal

您的支付信息已安全处理。我们不存储信用卡详细信息,也无法访问您的信用卡信息。

估算运费

You may also like

Recently Seen