描述
The road is not a place for an animal to brace itself. It is a place for the animal to rest. Every car has a back seat, and almost none of them has anywhere a dog can actually lie down. The Co-Pilot Den turns that dead strip of bench and footwell into a stable floor, suspended between the front and rear seats in the shape of a shallow hammock. A dog that used to scramble for grip on every roundabout now has a surface that stays under it.
The build is quiet rather than clever. The outer shell is Oxford cloth rated at 55 per cent polyester, backed by poplar wood panels and a small proportion of PVC, which is what gives the platform its flatness under load. The footprint is 136.5 by 70.5 by 42 centimetres, wide enough to span a standard rear bench, and the structure is rated to bear up to 100 kilograms, or 220.46 pounds, without the centre dipping toward the floorboards. A full-grown retriever can settle on it without the material creeping.
Practicality is where the design earns its place. The whole assembly weighs 4 kilograms, so it lifts out in one hand and folds flat against the boot wall between trips. The surface takes a mechanical wash, which means mud, sand, road salt and wet fur are a laundry cycle rather than a permanent feature of the upholstery. The plaid finish in black and grey is deliberately plain, chosen to sit against any interior rather than to advertise itself.
It is not a mat. It is a seat the car never came with.
Four things have to be true at once for a back seat to work for a dog: the surface has to stay flat, the sides have to stay up, the whole thing has to come out for cleaning, and none of it can wobble. The list below is how the Co-Pilot Den answers each one.
What the Hammock Restores
- ✦ Four-sided hammock geometry keeps the dog on the bench instead of in the footwell
- ✦ Oxford cloth outer shell shrugs off water, mud, sand and claw drag
- ✦ Poplar wood panels hold the platform flat under a loaded animal
- ✦ Load rating of up to 100 kg (220.46 lbs) with no centre sag
- ✦ 136.5 x 70.5 x 42 cm footprint spans a full standard rear bench
- ✦ 4 kg total weight, lifts out in one hand and folds flat for storage
- ✦ Mechanical-wash surface turns a muddy trip into one laundry cycle
Cover Record
- Brand: BINGOPAW
- Model: P-XD1687
- Type: Waterproof pet car seat and backseat extender
- Materials: 55% polyester Oxford cloth, 40% poplar wood, 5% PVC
- Colour: Black and grey plaid
- Footprint: 136.5 x 70.5 x 42 cm (53.74 x 27.75 x 16.53 in)
- Load capacity: Up to 100 kg (220.46 lbs)
- Net weight: 4 kg (8.82 lbs)
- Cleaning: Mechanical wash
- Fit: Standard rear bench in passenger cars and SUVs
Where This Hammock Earns Its Keep
This cover is bought by owners who drive with a dog more than once a week. Some are commuters who take a dog to work and back and are tired of vacuuming hair out of the seat seams. Some are weekend travellers heading to trailheads and beaches, where a wet dog will otherwise soak through the upholstery before the drive home. Others have just bought a new car and want a barrier in place before the first scratch, not after it. In each case the appeal is the same: the dog stops sliding, the seats stop absorbing, and the journey stops being a negotiation between the animal and the driver.
Questions Drivers Ask
Q: Will this fit my car?
It fits a standard rear bench with a 136.5 x 70.5 cm platform, which covers the great majority of passenger cars, estates and SUVs. The hammock shape hangs between the front and back headrests, so it adapts to the seat base rather than needing an exact match.
Q: How much weight can it hold?
The structure is rated to bear up to 100 kg, or 220.46 lbs. That covers a large-breed dog together with a passenger leaning back to settle it, with the platform still holding flat.
Q: Can I wash it after a muddy walk?
Yes. The cover is designed for mechanical washing, so mud, sand and wet fur come out in a standard cycle. Let it dry fully before refitting it to the car.
Q: Does it block the rear seat belts?
The hammock sits on the seat base and rises to the headrests at the front and rear. Belt stalks remain reachable at the sides, so a human passenger can still use the rear bench when the cover is in place.
Q: Is it hard to install?
No. The four corners loop over the front and rear headrests and the platform settles into position in under a minute. There is nothing to bolt down and no tools are required.
Q: How does it store when not in use?
The whole unit is 4 kg and folds flat. It stands against the boot wall or slides under a seat, so it does not have to stay in the car between trips.
Customer Reviews
Payment and Security
您的支付信息已安全处理。我们不存储信用卡详细信息，也无法访问您的信用卡信息。