The Current Bench | Adjustable Regulated DC Power Supply 60V 20A 1000W

节省20%
East Supplier PlatformSKU:1005006859564109-100V10A 1000W-China Mainland-AC 220V

价格:
$653.96 $817.45

含税 运费在结账时计算

股票:
有现货

描述

Bench power is a claim about control rather than capacity. Almost any supply can produce a voltage with nothing connected to it. The test arrives when a load starts pulling current and the output has to stay exactly where you set it. The Current Bench exists for that second moment, a regulated DC supply covering four voltage and current envelopes from 15 volts at 30 amps up to 200 volts at 5 amps, with 30V/30A and 100V/10A configurations in between.

A switching topology keeps efficiency high and waste heat low, so the unit holds its output for long sessions without turning the bench into a radiator. Output wattage ranges from 450 watts on the 15V/30A configuration to 1000 watts on the 100V/10A configuration, with rated capacity spanning 40 to 1000 VA across the range. Input runs at 50 or 60 Hz, and the 110 volt or 220 volt AC option is chosen at checkout so the supply arrives matched to your mains.

The package is complete rather than nearly complete. Each unit ships with the DC power supply, a mains cord, a low-power output cable, and a high-power output cable, which matters when the first job is due the day it lands. Charging guidance for lithium packs is included and states the safe stopping point plainly: when charging current falls to 50 milliamps or below, disconnect the battery to avoid overcharging.

Set the voltage, hold the current, and judge the instrument by what it does when the load fights back.


Key Features

  • ✦ Four output envelopes: 15V/30A, 30V/30A, 60V/20A, 100V/10A, 200V/5A
  • ✦ Output wattage from 450 W to 1000 W depending on configuration
  • ✦ Regulated switching topology with 50/60 Hz AC input
  • ✦ Continuous adjustment across the voltage and current range
  • ✦ Rated capacity from 40 VA to 1000 VA
  • ✦ Selectable AC 110 V or 220 V input at checkout
  • ✦ Low-power and high-power output cables included
  • ✦ Lithium charging guidance printed in the supplied documentation

Technical Specifications

  • Series reference: AN53-R-SPS6020
  • Output configurations: 15V 30A, 30V 30A, 60V 20A, 100V 10A, 200V 5A
  • Output power: 450 W to 1000 W depending on configuration
  • Topology: Switching regulated DC supply
  • Adjustment: Continuous across the voltage and current range of the selected configuration
  • Rated capacity: 40 to 1000 VA
  • AC input: 110 V or 220 V selectable, 50/60 Hz
  • Included accessories: DC power supply, mains cord, low-power output cable, high-power output cable
  • Charging guidance: Disconnect the battery once charging current falls to 50 mA or below
  • Region variants: Multiple input voltage and dispatch regions at checkout

Where It Belongs

This belongs wherever a circuit needs to be tested at a defined voltage rather than a battery's idea of one. Repair benches use it to bring up a board slowly and watch current draw as a fault indicator. LED and lighting fabricators drive strings at controlled current to measure output and heat. Motor and pump testing benefits from the higher-voltage envelopes, while lithium pack builders use the current-limited configurations for charging. Research benches, vocational training rooms, and electroplating setups all rely on the same property: the supplied voltage stays where it was set until someone changes it.

Frequently Asked Questions

Q: How do I choose between the voltage and current configurations?

Decide which value you need to hold steady. Low-voltage, high-current work such as plating or motor testing suits 15V/30A. Electronics work that needs more voltage suits 100V/10A or 200V/5A. The 30V/30A and 60V/20A configurations sit in the middle and cover most general bench work.

Q: Does it ship with cables?

Yes. The DC power supply, a mains cord, a low-power output cable, and a high-power output cable are all included.

Q: Can I charge lithium batteries with it?

Yes, with the supplied guidance applied. Connect the positive and negative poles correctly and disconnect the battery once charging current falls to 50 milliamps or below, so the pack is not held at full charge indefinitely.

Q: Is the output really regulated?

Yes. It is a regulated switching supply, which means the output holds its set value as the load varies rather than drifting with it.

Q: Which mains voltage should I select?

Choose the option matching your country. Both 110 volt and 220 volt input configurations are available, and the correct one is selected at checkout.

Q: What is the maximum output available?

Output reaches 1000 watts on the 100V/10A configuration, with 450 W and 900 W configurations also available in the range.

The EastSupplier Promise: Every unit is sourced through our own supply chain, inspected before dispatch, and shipped with tracked international delivery. If a component arrives damaged or the specification does not match this listing, our team replaces it or refunds it. No forwarding, no third party, no runaround.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
A
Amelie C.
Heavier than the photos suggest, and solid with it

Chose the higher voltage configuration for a plating setup and it has run daily without issues. It is heavier than expected, so plan the bench space before it arrives.

G
Grzegorz L.
Complete kit on arrival

Power supply, mains cord, and both output cables were in the box. I was charging lithium packs the same day using the cutoff rule from the supplied documentation. Good value for the wattage.

H
Hiroshi N.
Holds voltage under load

I use it for motor testing at thirty volts and it does not drift when the load ramps up. The high power cable is properly terminated rather than a thin lead, and the unit runs cool for a switching supply.

Payment and Security

PayPal

您的支付信息已安全处理。我们不存储信用卡详细信息,也无法访问您的信用卡信息。

估算运费

You may also like

Recently Seen