Globauto 手动金属收缩拉伸机 16/18 号板材加工 2件套 工业用

节省20%
East Supplier PlatformSKU:1005003409136670-China Mainland

价格:
$597.18 $746.48

含税 运费在结账时计算

股票:
有现货

描述

规格

品牌名称: Globauto

DIY 用品: 金属加工

高度关注的化学品: 无

产地: 中国大陆

类型: 其他

手动金属收缩机/拉伸机 16/18 号制造 2台工业用

金属收缩机和拉伸机

• 它是汽车、自行车或飞机车身金属加工的理想机器。这款机器坚固耐用,可以轻松地以全负荷收缩或拉伸金属。

• 适用于车轮开口、车门门框、挡风玻璃和行李箱排水槽周围的维修工作

• 收缩机用于收缩金属板以形成内曲线

• 拉伸机用于拉伸金属板以形成外曲线

• 均可形成半径小至 76 毫米/3 英寸的曲线

• 包括:2个主体,1套收缩钳口,1套拉伸钳口,2个手柄

• 容量(毫米/号):1.2/18 软钢,1.5/16 铝

• 喉深(毫米//英寸):25.4 // 1

•完全便携

•底座带安装孔

•可夹在虎钳中

•硬化臂和枢轴销

•几秒钟内即可从拉伸机转换为收缩机

• 包装尺寸(厘米):35X19X9

• 净重/毛重(公斤):9.6/10.5


Customer Reviews

Customer Reviews

Based on 5 reviews
60%
(3)
40%
(2)
0%
(0)
0%
(0)
0%
(0)
A
Anaïs G.
Honest capacity for 16 and 18 gauge

The spec sheet says 1.5mm aluminium and it does 1.5mm aluminium without jaw chatter, which is more than I can say for the cheap pair I replaced. Mounting it to a bench post took ten minutes. The jaws will mark soft aluminium if you are careless, so tape the panel first, and the bodies are heavy enough that you want them bolted down rather than clamped.

P
Pieter V.
Both bodies in one kit is the entire point

A compound curve needs the panel gathered and then spread, and having the shrinker and stretcher share the same throat geometry means I stop switching machines mid-panel. I have been shaping 1.2mm mild steel for a motorcycle tank and both bodies bite at full jaw depth, not just at the edge. The handles are long enough to work without my forearms giving out.

M
M. Kowalski
Buy the pair, budget for mounting

Quality is solid and the packing was compact with no damage. Do not expect it to work well clamped to a wobbly bench, because the finish on thin alloy shows every bit of flex. Well priced for what it does.

R
Rob D.
Both directions in one set

Having the shrinker and the stretcher on the same throat depth means I stopped swapping between two machines mid panel. Jaws handle 18 gauge steel without complaint. Mounting them to a solid bench mattered more than I expected.

K
Kenji A.
Made short work of a wheel arch

Reproducing a rusty wheel arch lip on a classic. The shrinker gathered the curve in a few passes and the aluminium I formed afterwards stayed smooth. Hand operation gives the control that a powered tool loses.

Payment and Security

PayPal

您的支付信息已安全处理。我们不存储信用卡详细信息,也无法访问您的信用卡信息。

估算运费

You may also like

Recently Seen