描述
A monitor at the wrong height costs an inch of posture every hour, and posture is not recovered by stretching at the end of the day. The F80 is a gas-spring arm that holds a 17 to 30 inch display at eye level and keeps it there, which is the one thing a fixed stand cannot do. The spring is preloaded for the weight range, so the screen stays where it is placed instead of drifting down the desk over an afternoon.
The mechanism is a single gas strut with tension adjustment, mounted to a C-clamp or a grommet base. Vertical travel covers roughly 40 cm, the arm extends to about 50 cm from the post, and the head rotates, tilts and swivels, so a single screen can be pushed to portrait for reading code and pulled forward for video calls without dismantling anything. Cable clips run along the underside of the arm, which is what stops a desk from turning into a nest within a month.
Build is steel with a matte powder coat, and the joints are tensioned rather than free, so the arm does not creep when a heavier monitor is fitted. The VESA plate is 75 by 75 and 100 by 100, which covers essentially every desktop display made in the last decade, and the clamp spreads load across the underside of the desk instead of concentrating it on a single point.
The practical gain is desk area. A monitor on an arm frees the footprint the stand occupied, which on a narrow desk is the difference between room for a keyboard and room for a keyboard plus a notebook. It also lifts the screen above the sightline of a laptop, so a two-device setup stops requiring a stack of books.
Ergonomics is not comfort. It is the absence of a slow cost.
What Makes It Different
- ✦Gas-spring arm preloaded to hold position without drifting
- ✦Vertical travel of roughly 40 cm and reach of about 50 cm
- ✦Tilt, swivel and rotation, including portrait orientation
- ✦Fits 17 to 30 inch displays on 75 x 75 and 100 x 100 VESA
- ✦C-clamp and grommet mounting with load spread across the desk underside
- ✦Tensioned joints that do not creep under a heavier monitor
- ✦Cable clips along the arm to keep the desk clear
Technical Specifications
- TypeSingle gas-spring monitor arm
- Screen Size17 to 30 inch
- Load CapacityApprox. 2 to 9 kg
- VESA Patterns75 x 75 mm and 100 x 100 mm
- Vertical TravelApprox. 40 cm
- Horizontal ReachApprox. 50 cm
- AdjustmentTilt, swivel, 360 degree rotation
- MountingC-clamp or grommet base
- MaterialSteel with matte powder coat
- Cable ManagementClips along the arm underside
Where It Earns Its Place
A home office desk that is too narrow for a stand. A trading or editing setup where a screen has to move between landscape and portrait. A shared desk where two people of different heights use the same display. A workshop bench where the monitor has to swing out of the way when a repair starts. The arm is the difference between a screen placed once and a screen placed correctly.
The EastSupplier Promise
Sourced directly from vetted manufacturing partners, inspected before dispatch, and priced without distributor layers. If the item arrives outside specification, we replace it or refund it. Every listing on this store is curated by a human buyer, not bulk-imported and abandoned.
Questions Buyers Actually Ask
Q: Will it hold my monitor without sagging?
The strut is tension-adjustable and the joints are tensioned rather than free, so a display within the rated load holds position. Very light screens need the tension reduced, which is a single screw adjustment.
Q: What monitor sizes are supported?
17 to 30 inch with a 75 or 100 mm VESA pattern, at a load of roughly 2 to 9 kg.
Q: Can it mount through a grommet instead of clamping?
Yes, both a C-clamp and a grommet base are supported, and the clamp spreads load to protect the desk surface.
Q: Does it rotate to portrait?
Yes, the head rotates a full 360 degrees, so portrait orientation is a push rather than a rebuild.
Q: How thick a desk will the clamp take?
The clamp is designed for typical desk thicknesses up to around 9 cm, and the pad spreads pressure so a laminate top is not crushed.
Q: Is assembly difficult?
The arm arrives partly assembled with the VESA plate separate. Mounting is a clamp, two bolts and a tension adjustment; most of the time goes into routing cables neatly.
Customer Reviews
Payment and Security
您的支付信息已安全处理。我们不存储信用卡详细信息，也无法访问您的信用卡信息。