The Honeycomb Gate | RS-Style Front Grille for Audi A3 8P, 2003-2008

节省20%
EastSupplier PlatformSKU:1005011817519236-Gloss Black-Germany

Color: Gloss Black
价格:
$187.66 $234.57

含税 运费在结账时计算

股票:
仅剩 18 件

描述

The Front Of A Car Is A Face. Most Owners Never Notice How Much A Grille Changes It. Walk around an A3 8P and the eye lands on the same three inches of real estate every time — the space between the headlights, where the factory grille sits flat and horizontal. Replace that panel with a honeycomb aperture and the entire front end reads lower, wider and more deliberate, without touching springs, bumpers or paint. It is the cheapest structural change in perception available to a car.

The Honeycomb Gate is moulded in ABS rather than stamped from sheet, which matters more than the spec sheet suggests. ABS holds the hexagonal cell geometry sharp at the radius of each corner, keeps the gloss black finish even across a metre of surface, and stays dimensionally stable through a summer of engine-bay heat and a winter of road salt. The part is a direct replacement for OEM reference 8P4853651A, dimensioned at 92cm by 50.5cm by 15.5cm to match the 8P aperture exactly — no trimming, no bracket fabrication, no gaps at the fender line.

Weight is honest at 2.6kg, and that figure is worth noting: it is heavy enough that the panel does not flex at highway speed and light enough that the factory mounting points carry it without reinforcement. The grille arrives gloss black, honeycomb, and without an emblem or rings — deliberately. Badges are personal, and drilling a new panel yourself gives a cleaner result than accepting someone else’s placement.

Fitment is not a compromise you accept. It is the specification you start from.


Key Features

  • ✦ RS-style honeycomb geometry in moulded ABS, gloss black finish
  • ✦ Direct replacement for OEM reference 8P4853651A — no cutting or drilling of the bumper
  • ✦ Dimensioned 92cm x 50.5cm x 15.5cm to match the Audi A3 8P aperture
  • ✦ 2.6kg panel weight: rigid at speed, within factory mounting load
  • ✦ Emblem-free by design so you choose your own badge placement
  • ✦ CE tested, one-year manufacturer warranty
  • ✦ Ships as a single front grille, protected in a 92cm carton

Technical Specifications

  • Fitment: Audi A3 8P / 8PA, model years 2003-2008
  • Fitment Type: Direct replacement, front bumper
  • OEM Reference: Replace for 8P4853651A
  • Style: Honeycomb, RS3 look
  • Colour: Gloss black
  • Material: ABS plastic
  • Panel Dimensions: 92.0cm x 50.8cm x 15.5cm (36.22in x 19.88in x 6.10in)
  • Package Weight: 2.6kg / 5.73lb
  • Contents: 1x front bumper grille, no emblem or rings
  • Certification: CE
  • Warranty: 1 year manufacturer
  • Exclusions: Does not fit A3 S line, S3 or RS3 models

Where It Belongs

The 8P generation is now a second-owner car, and that is exactly the population this panel serves: enthusiasts refreshing a 2006 to 2008 A3 that has faded trim and a tired factory grille, workshops doing a front-end refresh before resale, and body shops replacing accident-damaged grilles with something better than original. It is also a natural first modification — reversible in under an hour with hand tools, and it does not touch the powertrain, suspension or emissions systems, so it changes nothing about how the car is registered or insured. Professional installation is recommended for the bumper removal step, and the panel arrives without instructions by design, since the factory service procedure is the correct reference.


Frequently Asked Questions

Q: Will this fit my 2007 Audi A3?

A: It fits 8P and 8PA chassis cars built between 2003 and 2008. It will not fit S line, S3 or RS3 models, whose bumper apertures differ.

Q: Does it come with the Audi rings?

A: No. The grille ships without an emblem or rings so you can transfer your original badge or fit an aftermarket one to your own taste.

Q: Is drilling required?

A: No. The panel uses the factory mounting points and is a direct replacement for 8P4853651A. Bumper removal is required, which is why professional installation is recommended.

Q: What finish is it?

A: Gloss black ABS. It can be painted, but the moulded finish is already even enough to install as supplied.

Q: Will it hold up to road salt and heat?

A: ABS is dimensionally stable across engine-bay temperature swings and resistant to the road salts used in winter markets, which is why it is used for OEM exterior trim.

Q: Can I install it myself?

A: Yes, if you are comfortable removing the front bumper. Allow two hours for a first attempt and have trim tools on hand for the clips.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
G
Greg M.
Good panel, no instructions

The part itself is solid and heavy enough that it does not flex on the motorway. It arrived without fitting instructions, so I pulled the bumper removal procedure from a forum. Allow two hours the first time.

T
Tom H.
Front end reads completely different

Same car, same paint, completely different presence in a car park. The honeycomb is sharp at the corners rather than rounded off, which is where most cheap grilles give themselves away.

A
Andrei P.
Went straight on my 2006 A3

Factory mounting points lined up with no trimming at the fender line and the gaps are even on both sides. The gloss black matches the window trim better than I expected for an aftermarket panel.

Payment and Security

PayPal

您的支付信息已安全处理。我们不存储信用卡详细信息,也无法访问您的信用卡信息。

估算运费

You may also like

Recently Seen