The Invisible Square | 10 cm Brushed Gold Floor Drain

节省20%
EastSupplier PlatformSKU:1005003202348716-Brushed Gold-China Mainland

Color: Brushed Gold
价格:
$47.54 $59.42

含税 运费在结账时计算

股票:
有现货(271 件),可随时发货

描述

A floor drain is the one fitting in a bathroom that nobody wants to look at, and every bathroom is improved by one you cannot see. This is a ten by ten centimetre square in brushed stainless steel, finished in a warm gold tone, sitting flush with the tile. The waste opening disappears into a narrow perimeter slot, so the floor reads as an unbroken plane and the water simply leaves.

The mechanism under the surface is what earns the price. A deodorising core traps the line between the drain and the soil pipe, which is what stops sewer gas and the small insects that follow it from coming back up through the floor. The strainer basket lifts out for cleaning without tools. The body is stainless steel rather than plated zinc, so the part that is permanently wet is the part that will not corrode.

Installation is a plumbing decision, not a decorative one, and the specification matters more than the finish: the drain body has to sit at the right depth for the tile bed and the trap has to be accessible. If your tiler or plumber asks for the drawing, the model number is MT-B89 and the footprint is a standard 100 mm square. Certification is CE.

The finish is lacquered over the brushed grain, so it resists the water spotting that polished metals collect in a hard-water house. Brushed gold is a deliberate choice at the moment: it reads warm against grey tile, stone, and microcement, and it does not date the way chrome eventually does.

The best drain in a bathroom is the one you have to be told about.


What separates it from a builder-grade grate

  • ✦ 100 x 100 mm square footprint, flush fitting for a seamless tiled floor
  • ✦ Brushed stainless steel body with a lacquered warm gold finish
  • ✦ Perimeter slot waste opening that hides the drain line from standing height
  • ✦ Deodorising core that blocks sewer gas and drain insects from the soil pipe
  • ✦ Removable strainer basket, no tools required for cleaning
  • ✦ CE certified, model MT-B89
  • ✦ Corrosion resistant where it matters, in the wet body rather than the visible plate

Model and dimensions

  • Model: MT-B89
  • Size: 100 x 100 mm square
  • Material: Stainless steel, brushed
  • Finish: Brushed gold, lacquered
  • Function: Deodorising floor drain with removable strainer
  • Drain method: Odour trap core
  • Application: Bathroom, shower, wet room floors
  • Certification: CE
  • Installation: Flush with tile, standard 100 mm waste footprint

Where it belongs in a renovation

It belongs in a renovation where the floor is being re-laid and the detail budget is being spent on things people touch and see. A wet room, a walk-in shower, a guest bathroom being brought up to the standard of the rest of the house. Because the plate is flush and the slot is narrow, it also suits microcement and large-format tile, where a round plastic grate would break the surface immediately.

Installation and maintenance

Q: Will it fit an existing drain point?

The body is a standard 100 mm square, which is the common footprint in most tiled bathrooms. The waste pipe connection is what your plumber needs to confirm before the tile bed goes down, not after.

Q: Does the gold finish wear off?

The colour is a lacquered finish over brushed stainless, not a painted coating. It handles normal cleaning chemistry, but abrasive pads and chloride-based descalers will dull any lacquered metal, this one included.

Q: How do I clean the trap?

Lift the top plate, remove the strainer basket, rinse it, and put it back. Hair and soap residue collect in the basket by design, which is why it is removable without tools.

Q: Will it stop smells from the sewer?

The deodorising core is a physical barrier at the drain, which is what stops gas and insects travelling back up. It is not a substitute for a correctly vented soil stack.

Q: Is a plumber required to install it?

Yes for a new floor, because the drain body is set into the screed and the tile bed is cut around it. Replacing an existing 100 mm drain plate with the same footprint is a simpler job, but still a plumbing one.

Our handling of every order

Every order is checked against the photographs above before it is packed, and it travels with tracking from the workshop to your door. If something arrives damaged, wrong, or simply not as described, write to us with a photo and we will replace it or refund it. No forms, no argument.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
H
Hugo C.
Plan for the plumbing, not just the finish

Beautiful fitting, but this is set into the screed, so it belongs in a renovation rather than a swap. My plumber asked for the model number and the drawing, which is why I am mentioning it. Worth the planning.

M
Mala Y.
No smell, and that was the old problem

The deodorising core is what solved it, the previous drain let sewer air back up in warm weather and that has stopped entirely. Basket lifts out by hand and rinses clean in seconds. Lacquer has held up to normal bathroom cleaning.

D
Dorian E.
The floor reads unbroken now

Replaced a round plastic grate in a microcement shower and the difference is the whole point of the product, you cannot see the drain from standing height. The brushed gold is warm against grey rather than brassy. My tiler confirmed the 100 mm footprint before the tile bed went down.

Payment and Security

PayPal

您的支付信息已安全处理。我们不存储信用卡详细信息,也无法访问您的信用卡信息。

估算运费

You may also like

Recently Seen