3DSWAY 20/100件 3D打印机耗材连接器 PTFE管耗材接头 内径1.8mm 外径2.6mm 长37mm

节省20%
East Supplier PlatformSKU:1005006321813053-100pcs

价格:
$11.61 $14.51

含税 运费在结账时计算

股票:
有现货(99909 件),可随时发货

描述

规格

品牌名称: 3DSWAY

商品类型: PTFE管

型号: PTFE管

产地: 中国大陆

高度关注的化学品: 无

选择: 是

半选择: 是



Customer Reviews

Customer Reviews

Based on 4 reviews
50%
(2)
50%
(2)
0%
(0)
0%
(0)
0%
(0)
H
Hana K.
Works best with a clean square cut

My first attempt leaked because I cut the filament at an angle, so take the time to trim it flush and it seals perfectly every time. The PTFE body is slick and has not worn after weeks of use. A couple more in the pack would make it better value.

Y
Yusuf A.
Saved a fourteen hour print at hour twelve

The spool ran dry mid-print and this connector let me splice the next reel on without pausing the job, which is exactly what I needed. The bore is sized accurately for 1.75mm filament so there is no drag and no slipping in the extruder. I keep three in the drawer now.

A
Anika R.
Perfect fit, worth buying the bigger bag

The bore is genuinely 1.8mm rather than a nominal figure, so there is none of the wobble that caused tangles with the cheaper connectors I tried before. I fused two spools on a fourteen hour PETG print and there is no visible seam in the finish. One note, cut the filament ends square before you push them through or the joint can catch on the way into the hotend.

T
Tomasz W.
Changed how our print farm handles spool changes

We run six printers nearly around the clock and the tail end of every spool used to mean either a paused job or forty metres in the bin. These connectors press into the PTFE tube and the 1.8mm bore keeps the 1.75mm filament centred with no drag at all, so extrusion pressure is identical either side of the joint. Bought the 200 piece bag and it has paid for itself in a fortnight of reclaimed filament.

Payment and Security

PayPal

您的支付信息已安全处理。我们不存储信用卡详细信息,也无法访问您的信用卡信息。

估算运费

You may also like

Recently Seen