描述
A resin printer is a light source, a screen and a vat, and the resin is the only part of that chain that decides what the print is actually worth. The machine can resolve forty microns and it will still produce a brittle, cloudy part if the photopolymer cures hard and fast instead of hard and clean.
The Photon Vat is a 405nm photopolymer formulated for the LCD and DLP wavelength band. Tensile strength sits between 45 and 65 MPa, flexural strength between 55 and 80 MPa, and hardness lands at 80 to 90 Shore D, which is the working range for parts that need to hold an edge, take a thread or survive a drop. Viscosity of 300 to 400 MPa.s keeps the layer peel gentle on the film, and a density of 1.05 to 1.15 g/cm3 keeps the vat load predictable.
It ships in one kilogram bottles in green, white and blue, each color aimed at a different job: white for miniatures that will be painted, gray-adjacent green for detail evaluation, blue for parts where surface finish matters. Store it between 15 and 25 degrees Celsius, away from light, and the shelf life runs to a year unopened.
The printer sets the limit. The resin decides whether the part reaches it.
Key Features
- ✦ Formulated for the 405nm band used by LCD and DLP resin printers
- ✦ 80 to 90 Shore D hardness for parts that hold detail and take handling
- ✦ Tensile strength of 45 to 65 MPa and flexural strength of 55 to 80 MPa
- ✦ Viscosity of 300 to 400 MPa.s for a controlled peel on each layer
- ✦ Density of 1.05 to 1.15 g/cm3 for predictable vat loading
- ✦ One kilogram bottle, sealed for storage between 15 and 25 degrees Celsius
- ✦ Available in green, white and blue for different finishing workflows
Technical Specifications
- Form: Liquid photopolymer
- UV Wavelength: 405 nm
- Net Weight: 1 kg
- Hardness: 80 to 90 Shore D
- Tensile Strength: 45 to 65 MPa
- Flexural Strength: 55 to 80 MPa
- Viscosity: 300 to 400 MPa.s
- Density: 1.05 to 1.15 g/cm3
- Shelf Life: 1 year sealed
- Storage: 15 to 25 degrees Celsius, away from light
Where It Earns Its Place
Miniature painters who want a surface that takes primer and holds an edge through handling. Model makers printing functional brackets, jigs and housings where hardness matters more than flex. Jewellery and dental pattern work where fine detail has to survive the wash and cure. Print farms running batches where a predictable peel and a stable bottle weight make the day easier to schedule.
The EastSupplier Promise
Every unit is inspected before it leaves our warehouse, packed in protective packaging, and dispatched with tracking. If a piece arrives damaged or not as described, contact us within 30 days and we will make it right with a replacement or a refund. We answer messages in English within one business day.
Questions Buyers Ask
Q: Will this work with my LCD or DLP printer?
Yes. The resin is formulated for the 405nm band, which is the wavelength used by current LCD and DLP machines. Check that your printer exposes in that band before ordering.
Q: How strong are the printed parts?
Hardness of 80 to 90 Shore D with tensile strength of 45 to 65 MPa produces a rigid part that holds detail and takes normal handling. It is not an engineering flex resin, so parts that need to bend should use a different formulation.
Q: Is it brittle?
It is a hard, rigid photopolymer, which means thin unsupported features can snap under point load. Thicken walls where the part will be gripped and post cure fully for the best balance.
Q: How do I clean parts after printing?
Wash in isopropyl alcohol, then remove supports before the final cure. Curing with the supports still attached locks them in harder than the part itself.
Q: How long does the resin keep?
A sealed bottle has a shelf life of about one year. Once opened, keep it capped, out of light, and within 15 to 25 degrees Celsius, and return unused resin to the bottle through a filter.
Q: Do I need to cure the print afterwards?
Yes. Wash and then cure under UV or sunlight until the surface stops feeling tacky. Under curing leaves the part soft and over curing makes it brittle, so check every few minutes.
Q: What is the difference between the colors?
The chemistry is the same. White hides layer lines and takes paint well, green shows fine detail during inspection, and blue gives the cleanest read on surface finish.
Q: Can I mix it with other resins?
Mixing with a different brand makes the exposure settings unpredictable. If you need a blend, test a small batch and expect to recalibrate layer times.
Q: Does it smell strongly?
It has the typical acrylic odour of photopolymer resin. Ventilate the print room, keep the vat covered between jobs, and wear gloves when handling liquid resin.
Customer Reviews
Payment and Security
您的支付信息已安全处理。我们不存储信用卡详细信息,也无法访问您的信用卡信息。
