The Ratio | CNC 36T Narrow-Wide Chainring for Bafang Mid-Drive

节省20%
EastSupplier PlatformSKU:1005005320652321-36T (No Offset)-UNITED KINGDOM

Color: 36T (No Offset)
价格:
$54.19 $67.74

含税 运费在结账时计算

股票:
有现货

描述

A mid-drive motor does not make a hill disappear. It changes the arithmetic of the hill. The chainring is where that arithmetic is written, and most conversions inherit whatever ring the kit shipped with, usually a large one chosen for flat-ground cadence rather than for the gradients the rider actually climbs. Change the ring and you have re-geared the entire machine without touching the motor, the controller or the battery.

The Ratio is a 36-tooth ring cut from CNC aluminium alloy, built for Bafang BBS01, BBS02, BBS01B, BBS02B and BBSHD mid-drive units in the 250W to 750W band. Fewer teeth mean the motor spins faster for the same road speed, which puts the drive closer to its efficient range and gives the rider a lower climbing gear. The tooth profile is narrow-wide and cut deep, so the chain seats decisively and stays seated over roots, kerbs and gravel wash. Weight is low, and the ring is machined rather than stamped, so it stays true through load.

Installation is a straightforward replacement of the original ring, with no offset on this version, which keeps the chainline where the frame was designed to have it. Thread pitch, bolt pattern and mounting face match the Bafang crank interface directly. It is the kind of part that is easy to overlook and hard to stop noticing afterwards, because every climb you take afterwards is measured against the gear you used to have.

There is a maintenance argument here too. A stamped steel ring deforms slowly under load, and the deformation shows up first as a chain that will not stay quiet no matter how carefully it is tensioned. A machined aluminium ring holds its plane, which means the chain runs flat against the teeth instead of riding the edge of them. That single property is why drivetrain noise often disappears after a ring swap, and why chain and cassette life extends: a chain that is not being dragged sideways wears far more slowly. The 36T geometry also means fewer teeth carrying the same torque, so tooth quality matters more than tooth count, and this is where a CNC part distinguishes itself from whatever came in the kit box.

A smaller ring is not a compromise. It is a re-gearing of the entire hill.


Key Features

  • ✦36-tooth CNC aluminium alloy chainring for Bafang mid-drive motors
  • ✦Compatible with BBS01, BBS02, BBS01B, BBS02B and BBSHD units
  • ✦Rated for 250W, 350W, 500W and 750W drive systems
  • ✦Narrow-wide deep tooth profile that resists chain derailment and wear
  • ✦No offset on this version, preserving the factory chainline
  • ✦Lower gearing that brings the motor into its efficient cadence range
  • ✦Available in black and blue finishes, with a 30-day warranty

Technical Specifications

  • MaterialCNC aluminium alloy
  • Tooth count36T
  • OffsetNo offset
  • Compatible motorsBAFANG BBS01 / BBS02 / BBS01B / BBS02B / BBSHD mid-drive
  • Motor power range250W / 350W / 500W / 750W
  • Tooth profileNarrow-wide, deep tooth
  • Finish optionsBlack, Blue
  • Warranty30 days
  • Dispatch window3 to 7 days
  • Model36T

Where It Belongs

Commuters converting a hardtail for a hilly route notice the difference first, because the ring turns a motor that bogged on gradients into one that pulls cleanly. Cargo-bike builders use the lower ratio to move loaded weight from a standstill without stalling the drive. Gravel and touring riders fit it when the route spends more time climbing than cruising. Anyone replacing a worn or damaged original ring gets the same part the motor was designed around, machined to a higher standard than the stamped unit it replaces.


Questions, Answered

Q: Will a 36T ring fit my Bafang motor?

It fits BBS01, BBS02, BBS01B, BBS02B and BBSHD mid-drive units. Confirm your motor series before ordering, because the mounting interface differs between the BBS family and other drive systems.

Q: What does the no-offset version change?

It keeps the chainring in the same plane as the original, so the chainline the frame was designed for is preserved. Offset versions exist for frames that need the ring moved outward, and fitting the wrong one shifts wear onto the drivetrain.

Q: Does a smaller chainring reduce top speed?

It reduces the road speed available at a given cadence, and in exchange it lowers the gearing for climbing. For most converted bikes on mixed terrain that trade is the point of the change.

Q: Is the chain more likely to come off a smaller ring?

The narrow-wide deep tooth profile is specifically designed to hold the chain. Derailment risk comes from a worn chain or a misaligned chainline far more than from tooth count.

Q: What is the warranty period?

Thirty days from delivery, covering manufacturing defects in the machined ring.

Q: Which countries do you ship to?

Dispatch is 3 to 7 days to the EU, USA, Russia, Canada and Australia, with the destinations served from regional stock where available.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
I
Ivo G.
Drivetrain went quiet after the swap

The old ring had a wobble I had been chasing for months with tension adjustments. New ring runs flat and the noise is gone. Chain wear looks better too.

H
Halina P.
Exact fit, gearing takes a ride to adjust to

Machining quality is obvious next to the stamped ring it replaced. First ride felt strange because the cadence changed, by the third it made sense. No offset means my chainline stayed where the frame wanted it.

F
Ferris J.
Turned my commuter into a climber

Fitted this to a BBS02 at 750W and the difference on gradients is immediate. The motor sits in a better cadence range instead of bogging. Narrow-wide teeth have held the chain over gravel without a single drop.

Payment and Security

PayPal

您的支付信息已安全处理。我们不存储信用卡详细信息,也无法访问您的信用卡信息。

估算运费

You may also like

Recently Seen