The Screen Anchor | Magnetic Phone Mount for Lexus LX600 and LX700

节省20%
EastSupplier PlatformSKU:1005011763802009-Base and holder-1

Color: Base and holder-1
价格:
$31.49 $39.36

含税 运费在结账时计算

股票:
有现货

描述

An LX600 cabin is a deliberate composition. Leather, brushed metal, a screen set into the dash at an angle someone spent months deciding. Then a universal suction mount arrives, glues itself to the glass, and the composition is finished. The Screen Anchor was made for owners who would rather not undo the interior to hold a phone.

The base is shaped from a 3D scan of the LX600 and LX700 dash, so it sits on the screen surround the way a factory part would, without adhesive, without drilling, and without blocking the driver sightline. A 17 millimeter ball joint at the top means the mount accepts the holder you already trust, and the base also ships as a standalone piece for owners who prefer their own hardware. Segmented height adjustment plus 360 degree rotation covers the range from a landscape navigation view to a portrait call.

Four configurations exist because four kinds of driver exist: the base alone, the base with a gravity holder whose four C-shaped arms close in sync as the phone settles, a 15W MagSafe version for iPhone users, and a 66W charger version for phones that actually pull wattage. The gravity holder needs one hand and no magnets, which is the calmest option for a car that spends its life in stop-and-go traffic.

Nothing should be mounted on the glass of a car built this carefully.


Key Features

  • ✦3D-scanned base matched to the LX600 and LX700 screen surround, 2022 to 2026
  • ✦No adhesive, no drilling, no tools: seat the base and set the holder
  • ✦17 mm ball joint, compatible with most third-party phone holders
  • ✦Four configurations: base only, base with gravity holder, 15W MagSafe, 66W charger
  • ✦Four-arm synchronized gravity grip closes as the phone is seated
  • ✦360 degree rotation with segmented height adjustment
  • ✦Left-hand-drive fitment, validated against the reference screen panel

Technical Specifications

  • CompatibilityLexus LX600 / LX700, model years 2022 to 2026
  • Fitment noteLeft-hand drive vehicles; screen panel must match reference images
  • MaterialABS and metal
  • Mount interface17 mm ball joint
  • Rotation360 degrees
  • HeightSegmented, multi-position adjustment
  • Holder optionsGravity holder, 15W MagSafe holder, 66W charger holder
  • Charging output15W magnetic wireless, or 66W wired fast charge depending on variant
  • InstallationTool-free, non-destructive, removable
  • Base-only variantFor owners who already own a compatible holder
  • ColorBlack
  • PackageBase and/or holder per selected variant

Built For

LX600 and LX700 owners who run navigation or ride-hail work and want the phone at eye level rather than in a cupholder. Detailers and interior specialists who need a non-destructive mounting solution for client vehicles. Owners leasing rather than buying, for whom drilling is not an option. And anyone who has watched a suction cup fail on a hot dashboard in August and decided never again.

Frequently Asked Questions

Q: Will it fit a right-hand-drive LX600?

No. The base is shaped for left-hand-drive screen panels. Right-hand-drive interiors use a different surround.

Q: Does installation damage the dashboard?

No. The base seats onto the existing screen surround without adhesive or fasteners, and lifts off without residue.

Q: Can I use my own phone holder?

Yes. The 17 mm ball joint is a common standard, and the base-only variant exists exactly for that.

Q: Which variant charges fastest?

The 66W charger holder delivers the highest output for phones that support it. The 15W MagSafe variant is the wireless option for iPhone.

Q: Does the mount block the driver display?

No. The base is profiled to sit below the sightline, which is why it was 3D scanned from the factory panel rather than designed generically.

Design Notes

Most interior mounts are designed once and sold to everyone, which is why they end up clipped to a vent or stuck to glass with adhesive that leaves a ring on the trim. The Screen Anchor takes the opposite route: the base is generated from a 3D scan of the LX600 and LX700 dash, which is why it seats flush against the screen surround without fasteners. The profile is deliberately low so the base disappears behind the display rather than sitting above the sightline.

The 17 millimeter ball is the detail worth understanding. It is the most common interface in the phone-holder world, so the base becomes a platform rather than a fixed product: MagSafe puck today, a clamp tomorrow, a tablet cradle for a passenger on a long drive. Segmented height adjustment means the phone can sit below the vent line for a clean cabin or higher for navigation without glare, and 360 degree rotation covers landscape navigation and portrait calls without re-mounting.

Because the base is removable in seconds, leased vehicles and second owners are not locked into a permanent modification. Lift it off and the interior is exactly as it arrived.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
L
Liam L.
Check your screen panel first

Fit is excellent on my 2024 LX600, but read the note about left hand drive before ordering. The base alone option saved me buying a second holder I did not need.

L
Lena Z.
Gravity holder needs one hand

The four arms close as you seat the phone, so I can dock it at a red light without looking. Nothing rattles on rough roads, which was my worry with a clip style mount.

X
Xavier X.
Looks like a factory part

Seats onto the screen surround with no adhesive and no drilling, and sitting below the sightline means it disappears. The 17mm ball took my existing MagSafe puck without an adapter.

Payment and Security

PayPal

您的支付信息已安全处理。我们不存储信用卡详细信息,也无法访问您的信用卡信息。

估算运费

You may also like

Recently Seen