EMMC模块 8GB 16GB 32GB 64GB 带microSD转eMMC适配器 T2

节省20%
East Supplier PlatformSKU:4000402961538-32G

价格:
$221.79 $277.24

含税 运费在结账时计算

股票:
有现货(1275 件),可随时发货

描述

规格

模块名称:: EMMC模块

用途:: NanoPi K1 Plus/NanoPi K2/NanoPi M4/NanoPi M4V2/NanoPi NEO4 等模块

容量:: 8GB/16GB/32GB/64GB

品牌名称: Maerknon

兼容: NanoPi

产地: 中国大陆

配件类型: 扩展板

选择: 是

半选择: 是

将系统烧录到eMMC模块:

准备一张容量为8G及以上的SDHC卡,分别解压EFlasher固件和烧录工具win32diskimager,并在Windows下以管理员身份运行win32diskimager。在win32diskimager界面上,选择您的SD卡盘符。解压EFlasher固件后,点击Write按钮烧录到SD卡,或者在Linux下使用dd命令将EFlasher固件写入SD卡。
烧录完成后,从电脑中弹出SD卡,插入开发板并启动开发板,系统将从SD卡启动并自动运行。

EFlasher烧录工具,有多种操作方式:

方法一:连接HDMI兼容显示器或LCD显示器和USB鼠标,在图形界面上操作EFlasher。

方法二:通过网线将开发板连接到局域网,通过ssh登录开发板,然后输入命令eflasher并根据命令行提示操作。(注意:通过ssh登录的用户是root,密码是fa,开发板IP可以在路由器后台查看)

方法三:通过调试串口登录串口终端,在终端上输入命令eflasher进行操作。

方法四:将Icd2usb配件连接到开发板,按下配件上的K1键可以选择要烧录的系统,然后按下K2键确认烧录,烧录进度将显示在lcd2usb上。

烧录完成后,切断电源,然后拔出开发板上的SD卡,再次通电,开发板将从eMMC启动您刚刚烧录的系统。


Customer Reviews

Customer Reviews

Based on 4 reviews
75%
(3)
25%
(1)
0%
(0)
0%
(0)
0%
(0)
D
Daniel K.
Right part for headless boards

Provisioned four NEO4 gateways from the serial console with no monitor attached. Capacity options made it easy to standardise on one size across the fleet.

P
Priya N.
Works, adapter seats well

Module and adapter arrived together and fit the slot properly. Took me a few minutes to understand the LCD2USB flashing route, but flashing over ssh is simpler and needs no monitor.

E
Elena R.
Finally non-removable storage

This went into a signage player in a shop window. The old card died every summer from the write cycles. The eMMC module has been running for months without a single failure.

M
Marcus T.
Boots every time now

Replaced the microSD in a NanoPi M4 that had corrupted twice in a year. Flashed with EFlasher over ssh in about ten minutes and the board has been up since. No card to reseat when the cabinet gets bumped.

Payment and Security

PayPal

您的支付信息已安全处理。我们不存储信用卡详细信息,也无法访问您的信用卡信息。

估算运费

You may also like

Recently Seen