描述
A socket either fits or it does not, and everything else written about hand tools is decoration. The Socketwright begins there: fifty-nine pieces of chrome-molybdenum alloy steel, machined to a six-point hex profile and heat treated to sit between 42 and 48 on the Rockwell C scale. That hardness figure is the whole argument. Below it, corners round off under an impact gun and the fastener becomes a problem you did not have an hour ago. Above it, the socket shatters instead of flexing, and a fractured tool at 400 rpm is a worse outcome than a rounded bolt. Cr-Mo at HRC42-48 is where impact sockets are supposed to live, and it is where these sit.
The set covers both measurement systems without asking you to choose. Half-inch drive deep sockets run from 3/8 to 1-1/4 inch in SAE and 9 to 32 mm in metric; three-eighths drive adds 5/16 to 13/16 inch SAE and 6 to 19 mm metric, both in shallow profile. Two extension bars and two adapters bridge the gaps that a fixed-length socket cannot reach. Every piece carries a laser-etched size marking rather than a stamped one, which matters more than it sounds: stamped figures deform when the wall is thin, and a socket whose size you have to measure before you use it is a socket you stop trusting.
Around the whole set sits a split-strengthened steel case, built as separate sections rather than a single moulded shell, because a one-piece case is exactly the thing that cracks at the hinge two years in. Each cavity holds its piece, the lid closes flat, and the finished weight lands at 23.2 lbs. A black phosphate coating seals the exterior against oxidation, which is the difference between a set that is still complete in five years and a set with three missing sizes and a thin film of rust on the rest.
Torque is only useful if it arrives at the fastener. Everything else here exists to make sure it does.
Key Features
- ✦ 59 pieces, both measurement systems: 1/2 in drive deep sockets (3/8-1-1/4 in SAE, 9-32 mm metric) plus 3/8 in drive shallow sockets (5/16-13/16 in SAE, 6-19 mm metric).
- ✦ Cr-Mo alloy steel, HRC42-48: vacuum heat treated for impact absorption, the hardness band that resists both deformation and fracture.
- ✦ Six-point hex profile: spreads load across the flat faces of the fastener rather than the corners, which is what prevents rounded bolt heads.
- ✦ Laser-etched size markings: legible in low light and resistant to the wear that erases stamped digits on thin-wall sockets.
- ✦ Two extension bars and two adapters: reach recessed fasteners and bridge between drive sizes without a second set.
- ✦ Split-strengthened steel case: sectional construction that resists hinge cracking, with a dedicated cavity for every piece.
- ✦ Black phosphate coating: a dense conversion layer that blocks rust and oxidation in humid workshops and open truck beds.
Technical Specifications
- Set size: 59 pieces
- Material: Chrome-molybdenum (Cr-Mo) alloy steel
- Hardness: HRC 42-48
- Profile: 6-point hex
- 1/2 in drive, deep SAE: 3/8 in to 1-1/4 in
- 1/2 in drive, shallow metric: 9 mm to 32 mm
- 3/8 in drive, deep SAE: 5/16 in to 13/16 in
- 3/8 in drive, shallow metric: 6 mm to 19 mm
- Included accessories: 2 extension bars, 2 adapters
- Finish: Black phosphate, corrosion resistant
- Net weight: 23.2 lbs / 10.52 kg
- Storage: Split-strengthened steel toolbox with formed cavities
- Model number: SX1238MSSD590
- Certification: CE
- Origin: Mainland China
Application Scenarios
The Socketwright is sized for people who work on vehicles rather than around them. In a home garage it covers brake calipers, suspension arms, hub nuts and the engine-bay fasteners that a ratchet-and-socket assortment from a supermarket will round off on the second use. As a truck or service-van kit it earns its place through the split-strengthened case and the phosphate finish, which survive being thrown in a toolbox and left in a cold vehicle overnight. For metalworking shops, the 32 mm metric top end handles structural and machinery fasteners; for anyone assembling or repairing agricultural or powersports equipment, the combination of 3/8 and 1/2 drives in one tray means one case instead of two.
Frequently Asked Questions
Q: What is the difference between Cr-Mo and Cr-V sockets?
Chrome-molybdenum is the standard alloy for impact-rated sockets because it flexes under sudden high torque instead of cracking. Chrome-vanadium is the usual choice for hand-drive sockets, where shock loads are lower. This set is Cr-Mo and is intended for impact and high-torque work.
Q: Do the sockets cover both metric and imperial?
Yes. The 59 pieces include SAE from 3/8 in to 1-1/4 in and metric from 6 mm to 32 mm across the two drive sizes, so mixed fastener standards on the same vehicle are not a problem.
Q: Is a 32 mm socket included?
The 1/2 in drive metric run goes to 32 mm, which covers the common axle and hub nut sizes on passenger vehicles.
Q: Will these fit a standard impact wrench?
Both drive sizes are industry standard. Use the 1/2 in pieces for high-torque impact work and the 3/8 in pieces for lighter impact drivers and hand ratchets.
Q: How heavy is the full case?
23.2 lbs (10.52 kg) complete. It is a benchtop or vehicle kit rather than something intended for a jacket pocket, and the sectional case keeps the load distributed.
Q: How should the set be stored?
In the supplied case with the sockets clicked into their cavities. Keep the phosphate coating dry where possible and wipe the pieces with a light oil after use in wet conditions.
Customer Reviews
Payment and Security
您的支付信息已安全处理。我们不存储信用卡详细信息，也无法访问您的信用卡信息。