0-1200mm 木工平行导轨系统 雕刻机开槽轨道 电圆锯平行滑轨

节省20%
East Supplier PlatformSKU:1005007849451907-inch Type-United States

价格:
$191.30 $239.13

含税 运费在结账时计算

股票:
有现货(30 件),可随时发货

描述

规格

应用: 木工工具

品牌名称: 无品牌名称

DIY 用品: 木工

高关注化学品:

材料: 铝合金

型号: 铝合金平行导轨

产地: 中国大陆

包装:

类型: 组合

是否定制:


用于轨道锯导轨重复切割的平行导向系统,适用于 Festool 木工工具
1. 包括校准标记
2. 侧面刻度用于薄切
3. 刻度提高所有
4. 提供毫米和英寸版本


规格:
材质:铝合金
颜色:红色
选择:毫米类型/英寸类型
包装尺寸:398*288*77MM
轨道数量:8
总长度:1200MM


特点:
1. 适用于 festool 或Makita 导轨。
2. 轨道可拼接,刻度清晰。
3. 轨道出厂为 1200MM,由 4 小段拼接而成:0-300/300-600/600-900/900-1200MM。
4. 保护轨道,螺钉接触面积大,扳手可穿过螺钉预测位置,操作过程中轨道不会损坏。
5. 限位挡块位置可随意调整,平行轨道,限位挡块。


包装内含:
2 件 主体支架,用于安装平行导向系统
8 件 激光刻度两用轨道
2 件 375MM 滑块
4 件 17.8MM 滑块
6 件 63MM 滑块
2 件 153MM 滑块
4 件 M-16MM 螺钉
4 件 M-10MM 螺钉
2 件 蓝色塑料塞
2 件 不锈钢塞
1 件 十字螺丝刀
1 件 扳手
2 件 连接板
4 件 限位挡块


Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
R
Ryan Johnson
Huge upgrade from a clamped straight edge

Upgraded from using a aluminum straight edge and clamps for guided cuts. The difference is night and day — the bearing carriage eliminates the friction and wandering that happens when you're just following an edge by hand. Setup time is much faster. The router capability is a bonus I didn't expect to use as much. Only reason for 4 stars: the adapter plate mounting requires some trial-and-error to get the offset perfect. Once dialed in, it's rock solid.

L
Lisa Peterson
Perfect for on-site cabinet installation

As a kitchen installer, I'm constantly making final-fit cuts on site where bringing a table saw isn't practical. This guide rail with my cordless circular saw handles everything — filler strips, toe kicks, panel adjustments. The bearing carriage means consistent offset every single cut, no measuring and re-measuring. The anodized finish slides smoothly and doesn't mark the workpieces. Takes under a minute to set up and clamp. Best investment I've made this year for site work.

A
Andreas Mueller
Cut quality rivals a sliding table saw

I was skeptical that a guide rail could replace a panel saw for breaking down sheet goods, but this system proved me wrong. The aluminum extrusion is dead straight — I checked with a Starrett straightedge and couldn't find deviation. Mounted my Makita circular saw to the carriage and cut 18mm birch ply with edges clean enough for immediate edge-banding. The bearing-guided slide action is smooth and the clamping track on the underside prevents any shift during cuts. This has changed my workshop workflow completely.

Payment and Security

PayPal

您的支付信息已安全处理。我们不存储信用卡详细信息,也无法访问您的信用卡信息。

估算运费

You may also like

Recently Seen