描述
Two monitors on two stands is a desk that never lines up. One is always two centimetres lower, the seam in the middle never matches, and the cables hang where the eye lands. The Twin Span fixes the geometry first: a single clamped post carrying two gas-spring arms, each holding a 17 to 27 inch screen of 2 to 9 kg, adjustable by hand in every direction without a tool in sight.
Gas struts do the lifting, so a 24 inch panel moves with one hand and stays where it is put rather than sagging overnight. Each arm rotates through 360 degrees, tilts from 85 degrees up to 30 degrees down, and swivels 180 degrees, which covers stacks, side-by-side reading and a share-the-screen turn without unmounting anything. VESA patterns of 75 by 75 and 100 by 100 mm bolt straight to the plate, and both a clamp base and a grommet base come in the box: the clamp takes a desk 20 to 85 mm thick with at least 50 mm of clear edge, and the grommet takes a hole from 10 to 60 mm across.
Cable management runs inside the arm instead of behind it, so the tangle disappears with the stands. The frame is aluminium alloy, steel and ABS in matte charcoal or white, and the whole assembly retracts toward the post when the screens are not in use, which returns the desk surface that two monitor feet were occupying. This is the unglamorous purchase that changes how a working day feels, and it costs less than the second monitor did.
A desk is a tool. Align it once and stop adjusting it forever.
What Makes It Different
- ✦Two gas-spring arms on one post, each rated 2 to 9 kg
- ✦Fits 17 to 27 inch screens on VESA 75 x 75 or 100 x 100 mm
- ✦360 degree rotation, 85 to -30 degree tilt, 180 degree swivel per arm
- ✦Hand adjustment throughout, no tools needed once mounted
- ✦Clamp base and grommet base both included for 20 to 85 mm desks
- ✦Cable management routed inside the arm rather than behind it
- ✦Retracts to the post to free the desk surface when idle
Technical Specifications
- ModelNB H180
- ArmsDual, gas spring, independent
- Screen Size17 to 27 inch
- Load Per Arm2 to 9 kg
- VESA75 x 75 mm and 100 x 100 mm
- Rotation360 degrees
- Tilt85 degrees up, 30 degrees down
- Swivel180 degrees
- MountingClamp base and grommet base included
- FinishMatte charcoal or white, aluminium alloy and steel
Where It Earns Its Place
Traders run two charts side by side without a bezel gap in the middle of the data. Developers keep an editor on one panel and a browser on the other at matched height, which is the single biggest fix for neck strain at a desk. Video editors put the timeline on the lower screen and the preview above it on a stacked configuration, using the same arms. Anyone working from a rented desk or a home table gets the other benefit, which is that the monitors float and the surface underneath comes back for a keyboard, a notebook and a cup that no longer sits under a monitor foot.
The EastSupplier Promise
Sourced directly from vetted manufacturing partners, inspected before dispatch, and priced without distributor layers. If the item arrives outside specification, we replace it or refund it. Every listing on this store is curated by a human buyer, not bulk-imported and abandoned.
Questions Buyers Actually Ask
Q: Will it hold my 27 inch monitor?
Yes, provided the screen weighs between 2 and 9 kg and has a VESA 75 or 100 mm pattern. Check the panel weight without the stand, since 27 inch displays range from under 4 kg to over 8 kg and the gas spring is tuned to that band.
Q: What desk thickness does the clamp need?
The clamp suits desks from 20 to 85 mm thick with at least 50 mm of clear edge for the jaw. If your desk has a steel frame under the top, or a cable tray in the way, use the grommet base instead, which needs a hole between 10 and 60 mm across.
Q: Is it hard to install?
No, and one person can do it. Bolt the arm to the base, clamp or grommet the base to the desk, then hang the VESA plate on the arm after attaching it to the monitor. The gas spring is pre-tensioned and adjustable with the supplied key if a heavier panel sags.
Q: Can the two screens be set at different heights?
Yes. Each arm moves independently in height, tilt and swivel, so a laptop-height panel and a main display can be aligned at the same eye level, or one can sit above the other for a stacked layout.
Q: Does it work for a standing desk?
Yes, and it is one of the better accessories for one, because the screens rise with the desk and the height adjustment stays within reach. Just confirm the desk top is within the 20 to 85 mm range and that the underside is clear where the clamp lands.
Q: What is in the box?
The dual arm assembly, clamp base, grommet base, VESA plates, mounting hardware and the tension key. No monitor cables are included, since those depend on your screens.
Customer Reviews
Payment and Security
您的支付信息已安全处理。我们不存储信用卡详细信息，也无法访问您的信用卡信息。