The Vacuum Anchor | Magnetic Vacuum Car Mount with 15W Wireless Charging

节省20%
EastSupplier PlatformSKU:1005008819875705-Silver With Charge

价格:
$88.71 $110.89

含税 运费在结账时计算

股票:
有现货

描述

A phone mount fails in exactly one way: the moment the surface decides not to hold. Suction cups lose grip when the dashboard warms. Adhesive pads surrender in the first cold snap. This mount attacks the problem with two independent mechanisms, a vacuum cup that pulls the base flat against glass or a smooth dash, and a magnetic array that holds the handset without jaws or clips.

The body is metal rather than moulded plastic, which matters because a mount carries a lever arm: every bump multiplies through the stalk and arrives at the joint. The foldable arm rotates and adjusts, so the screen can sit at eye level for navigation and then fold flat when the car is parked. Charging is delivered inductively at up to 15W for the iPhone 12 through 16 families, with 5W, 7.5W and 10W standard profiles negotiated automatically for other Qi devices.

One hand is enough to place or remove the phone, which is the only meaningful test of a car mount. Nothing needs to be squeezed, released, or looked at. The magnet finds the handset; the vacuum holds the base.

The best hardware is the hardware you stop noticing at the third traffic light.


Why It Works

  • ✦ Dual retention: vacuum suction base plus magnetic handset array
  • ✦ 15W wireless charging for iPhone 12 through 16 series
  • ✦ Negotiates 5W, 7.5W and 10W Qi profiles for other devices
  • ✦ Metal body with a foldable, rotatable adjustable arm
  • ✦ One-handed placement and removal while driving
  • ✦ Works on windscreen glass, smooth dash panels and desk surfaces
  • ✦ Folds flat when the vehicle is parked

Technical Specifications

  • Material: Metal body, vacuum polymer base
  • Charging output: 15W maximum, Qi compatible
  • Qi profiles: 5W / 7.5W / 10W / 15W
  • Compatibility: iPhone 12 to 16 series, MagSafe cases
  • Mounting: Vacuum suction cup base
  • Arm: Foldable, rotatable, adjustable angle
  • Operation: Single-handed attach and release
  • Application: Navigation, hands-free calling, charging
  • Installation: Tool-free, repositionable
  • Finish: Silver

Who It Is For

Rideshare drivers mount it once and stop thinking about it. Delivery vans use the fold-flat arm so the windscreen is clear when the shift ends. Anyone who has watched a phone slide off a hot dashboard in August will recognise the value of a base that grips by vacuum rather than by adhesive, and the charging coil means the battery is replenished during the drive instead of drained by navigation.

Frequently Asked Questions

Q: Which iPhones charge at full speed?

A: The iPhone 12 through 16 families negotiate 15W. Older Qi phones fall back to 5W, 7.5W or 10W automatically.

Q: Does it need a MagSafe case?

A: A MagSafe case gives the strongest hold. Bare phones with magnetic arrays work directly, and non-magnetic phones need a magnetic ring or plate.

Q: Will the vacuum cup hold on a textured dashboard?

A: It holds best on glass and smooth panels. Textured or porous surfaces reduce suction, so the windscreen or a smooth trim piece is the reliable choice.

Q: Can it be repositioned?

A: Yes. Release the vacuum, wipe the surface, and re-seat the cup. No adhesive residue is left behind.

Q: Does the mount block the phone camera?

A: The magnetic ring sits below the camera island on MagSafe phones, so the lens stays clear.

Q: Does it charge through a thick case?

A: Cases up to about 3 mm thick charge normally. Metal plates and heavy battery cases interrupt induction.

Q: Does the arm vibrate while driving?

A: The metal body and foldable joint are stiffer than plastic stalks, which is what keeps the screen steady on rough roads.

Q: Can it be used outside a car?

A: The vacuum base works on any smooth surface, so it also serves as a desk stand for video calls.

Q: How much weight can the magnet hold?

A: The array is rated for typical handset weights of roughly 200 to 250 grams. A steel plate or a MagSafe case is recommended for heavier phones and rough roads.

Q: Does it interfere with signal or GPS?

A: No. The magnets sit outside the antenna band and do not degrade cellular, WiFi or GPS reception, which is what matters for a mount used for navigation.

Q: Will the suction base mark a dashboard?

A: The cup is a soft polymer that leaves no adhesive residue. On leather or vinyl dashes, mount to the windscreen or a smooth trim panel to avoid marking the surface.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
E
Emil G.
15W actually charges while navigating

An hour of maps and the battery went up rather than down. One hand to place the phone, one hand to take it off, which is all I wanted.

D
Delia F.
Metal body, no wobble

The arm is stiff enough that the screen does not shake on rough tarmac. Folding it flat when parked keeps the windscreen clear.

C
Cyrus D.
Has not let go in three weeks

Vacuum cup on the windscreen through a heatwave and it is still seated. My previous adhesive mount lasted four days in the same car.

Payment and Security

PayPal

您的支付信息已安全处理。我们不存储信用卡详细信息,也无法访问您的信用卡信息。

估算运费

You may also like

Recently Seen