描述
Every Machine Eventually Needs a Face.
A Raspberry Pi is a board with ambitions and no way to speak to the person standing in front of it. The Viewport is the smallest honest answer to that problem: a 7-inch 1024x600 panel with capacitive touch bonded to the glass, HDMI in for the picture and USB for the finger, in a form factor that sits on a desk, bolts into a panel or clips into a printed enclosure without a second housing.
Two panel options exist because the job splits in two. The IPS variant holds colour and viewing angle, which is the right choice for a dashboard, a media front end or anything seen from the side. The TN variant is the budget path for the case where the screen is read straight on and cost is the constraint. Both run at 500 cd/m squared with contrast in the 800:1 to 850:1 range, bright enough to read in a lit workshop and honest enough not to pretend it is a colour-critical display.
Compatibility is deliberately boring: Raspberry Pi 4, 3B+, 3B and 2B, Banana Pi, and any HDMI source that can drive 1024x600. AIDA64 and similar monitoring tools recognise it without a driver hunt, which is why the panel ends up on NAS builds, printer enclosures, home automation walls and kiosk projects where the only real requirement is a screen that appears when the machine boots.
A screen is not a luxury on a headless machine. It is the difference between a device and a product.
Why It Exists
- ✦ 7-inch 1024x600 panel in a 16:10 aspect with 500 cd/m squared brightness
- ✦ Capacitive touch bonded to the glass, USB interface, no driver installation
- ✦ IPS option for colour and viewing angle, TN option where cost leads
- ✦ HDMI video input, works with any source that drives 1024x600
- ✦ Raspberry Pi 4, 3B+, 3B, 2B and Banana Pi compatible, AIDA64 friendly
- ✦ 800:1 to 850:1 contrast with a 1 ms response time
- ✦ Bare-panel format for panel mounts, enclosures and kiosk builds
Technical Specifications
- Display size: 7 inch
- Resolution: 1024 x 600, 16:10
- Panel type: IPS or TN, variant dependent
- Brightness: 500 cd/m squared
- Contrast ratio: 800:1 or 850:1
- Response time: 1 ms
- Touch: Capacitive, USB interface
- Video input: HDMI
- Compatibility: Raspberry Pi 4, 3B+, 3B, 2B, Banana Pi
- Mounting: Bare panel, ordinary bracket mount
Where It Belongs
This is the panel that turns a headless build into something a person can operate. On a 3D printer it replaces the stock character display with a touch interface running OctoPrint or KlipperScreen; on a NAS or media server it becomes the local console you only touch when the network is down; in home automation it is the wall panel that does not depend on a cloud app; in a kiosk or workshop jig it is the screen behind a printed bezel. Educators use it because it survives being handed around, and because a Pi plus a 7-inch touch panel is the cheapest complete computer that still looks like a finished object.
Questions Answered
Q: Do I need to install drivers for the touch screen?
No. The panel presents itself as a standard HDMI display plus a USB touch device, so a current Raspberry Pi OS image detects both without extra packages. On other Linux distributions the same applies: HDMI video and a USB HID touch interface.
Q: IPS or TN, which should I choose?
Choose IPS if the screen will be seen from an angle or colour matters, which covers dashboards, media front ends and wall panels. Choose TN where the user sits square to the screen and the build has a hard budget, such as a printer status display or a utility panel.
Q: Will it work with a Raspberry Pi 5?
The panel is documented against Pi 4, 3B+, 3B, 2B and Banana Pi over HDMI. A Pi 5 with an HDMI adapter will normally drive the display fine because video is standard HDMI, but the documented and tested configurations are the ones listed.
Q: Is 1024x600 enough resolution?
For a console, a dashboard, a printer interface or a media front end, yes: 1024x600 is the classic 7-inch netbook resolution and interfaces designed for it are legible at arm length. It is not a display for photo editing or reading dense spreadsheets.
Q: Does it have built-in speakers?
No, audio is not part of the panel. Use the Pi audio output, HDMI audio through a display, or a USB sound device if the build needs sound, which keeps the panel thin and the cost down.
Q: Can I use it as a second monitor on a desktop?
Yes, over HDMI it behaves as a small secondary display on Windows, macOS or Linux. It is most often used that way with AIDA64 or a system monitor, where a 7-inch panel showing temperatures and load is more useful than another window on the main screen.
Q: How is it powered?
The panel takes power through its own input alongside the HDMI signal, so plan a supply for the screen as well as the Pi. Check the connector on your variant before ordering if you are building the harness in advance.
Q: What is included in the box?
The display with capacitive touch bonded, the HDMI and USB cables needed to connect it, and the mounting bracket. A printed bezel, stand or enclosure is a separate build step, which is deliberate: bare panel keeps the price down for people who are already designing an enclosure.






Customer Reviews
Payment and Security
您的支付信息已安全处理。我们不存储信用卡详细信息,也无法访问您的信用卡信息。
